6l6gc/6l6wgc

[a.moll]

Hallo allerseits,

hoffentlich kann mir hier wer weiter helfen.

In einem Class A Amp ist eine 6L6GC.
Es soll eine 6L6WGC rein.
Muss ich die Sockelbelegung umlöten oder/und wo brücken?
Wie bringe ich die Röhre auf Pentoden/Trioden -betrieb?

Danke erstmal
Gruß
a.moll

 

[zoranrataj2000]

Hi!
Here you have link to software tube specs.You do not need to do anything, only be carefull for voltage!!
And they are diferent sizes!

http://www.duncanamps.com/tdslpe/index.html

And something more:
Any 5881/6L6WGB The 5881 and 6L6WGB are the exact same tube. Even though Fender okayed them on the tube sheet, which is located on the inside of the Hot Rod Deluxe's cabinet, I decided to place them here. The reason they're included in the grey area is because of their specs; a maximum of 360 volts and 23 watts on the plates, and a maximum screen rating of 270 volts at 3 watts. vacuumtubes.com warns "DO NOT USE IN AMPS CALLING FOR 6L6GC's. They will likely melt down and damage your amp." So, they'll remain in this category under "proceed at your own risk."

Someone asked a very good question the other day in an email. They pointed out that the stock power tubes are 5881WXT, so I've been misleading people with the advice here. However, the Sovtek 5881WXT is not a real 5881. They're not even really audio tubes—they're made for Russian military jets. The only reason they're OEM is because they are reliable. Remember how I mentioned that tube names used to actually mean something? Well, for new tubes names don't mean much anymore. Look in an old RCA Receiving Tubes manual for 5881WXT—there was never such a thing until Sovtek "invented" it in recent years.

 

[a.moll]

Thanks for the answer

How is the 6l6WGC to wire for to work on half power?
Is it possible to let it work as pentode or triode?
What is to to and at which pin(s) is the switch to put?
Please for Dummies. ;-)

Greetings
a.moll

 

[Rockin'Daddy]

Eine 6L6 kann gar nicht als Pentode arbeiten, da sie eine Tetrode ist. Da fehlt ihr schlicht das Bremsgitter.
Aber egal, genug Wortklauberei. Überleg mal, was zu tun ist, um eine solche als Triode arbeiten zu lassen?

Kathode-->Steuergitter-->Schirmgitter-->Strahlleitblech (bei der Pentode Bremsgitter)-->Anode

 

[a.moll]

danke,

weil lesen und überlegen nicht half
wandte ich mich hier hin.

und wieder grüßle
von a.moll