socccero
Registrierter Benutzer
Bist du sicher, dass der nur 8 und 4 Ohm verträgt? Der 8 Ohm Ausgang meines Express+ ist auch 16 Ohm tauglich.
Nachtrag: das geht auch bei deinem Amp. Siehe Manual.
Hab auch mal nachgesehn und du hast recht! Hätte ich das mal vorher gewusst^^ aber ich seh nie in die Bedienungsanleitung, erst wenn was kaputt ist
MIS-MATCHING: When running a higher resistance ( for example: 8 ohm output into 16 ohm cabinet ), a slightly different feel and response will be eminent. A slight mismatch can provide a darker smoother tone with a little less output and attack. This response is a result of the amplifier running a bit cooler. Sometimes when using more than one cabinet a mismatch will be the only option.
You can always have a higher resistance ( 16 ohms, for example ) without damaging results, but too low of a resistance will likely cause problems.
You should experiment with different loading conditions as there may be a certain impedance mismatch that produces a sound you may prefer to the correct load condition. This will not hurt the amplifier, however mismatching in the higher direction will wear the power tubes faster.
Das merke ich mir für die Zukunft!



:romeo: